Actiontec-electronic Actiontec Wireless DSL Gateway GT701WG Manuel d'utilisateur télécharger pdf (Page 125)

122

Actiontec 54 Mbps Wireless DSL Gateway User Manual

123

Appendix G Non-Windows Setup

2. When the “TCP/IP” window appears, select Edit from menu bar, then select

User Mode.

3. When the “User Mode” window appears, select Advanced, then click OK.

4. In the “TCP/IP” window, select Ethernet from the “Connect via” drop-down

list.

5. Select Using DHCP Server from the “Configure” drop-down list.

6. Ensure the “Use 802.3” option is not checked.

7. Disregard any addresses in the IP Address text boxes. They will be reacquired

when the first connection is made.

8. Click Options and when the “TCP/IP Options” window appears, select Active.

Ensure the “Load only when needed” option is not checked, then click OK.

9. Close the “TCP/IP” window and when prompted to save changes, click Save.

10. Restart the computer. The TCP/IP settings are configured.

To finish setting up the computer to connect with the Gateway, follow the instruc-

tions in chapter 3, “Performing a Basic Setup,” on page 33.

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 134 135

Pas de commentaire

Actiontec-electronic Actiontec Wireless DSL Gateway GT701WG Manuel d'utilisateur Page 125