Actiontec-electronic DSL GATEWAY GT704 Manuel d'utilisateur télécharger pdf (Page 113)

110

Actiontec USB/Ethernet DSL Gateway User Manual

111

Appendix f Non-Windows Setup

2. When the “TCP/IP” window appears, select Edit from menu bar, then select

User Mode.

3. When the “User Mode” window appears, select Advanced, then click OK.

4. In the “TCP/IP” window, select Ethernet from the “Connect via” drop-down

list.

5. Select Using DHCP Server from the “Configure” drop-down list.

6. Ensure the “Use 802.3” option is not checked.

7. Disregard any addresses in the IP Address text boxes. They will be reacquired

when the first connection is made.

8. Click Options and when the “TCP/IP Options” window appears, select Active.

Ensure the “Load only when needed” option is not checked, then click OK.

9. Close the “TCP/IP” window and when prompted to save changes, click Save.

10. Restart the computer. The TCP/IP settings are configured.

To finish setting up the computer to connect with the Gateway, follow the instruc-

tions in chapter 3, “Performing a Basic Setup,” on page 33.

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 119 120 121

Pas de commentaire

Actiontec-electronic DSL GATEWAY GT704 Manuel d'utilisateur Page 113